|
**Honeywell Product Training Webcasts: TrueDRY™ Dehumidification Systems
|
|
**Honeywell Product Training Webcasts: TrueDRY™ Dehumidification Systems
Who: Contractors and Distributors
What: Join Honeywell Product Managers and technical specialist for elearning live - a series of online training Webcasts on our new products and programs.
Where: Online and on the Phone
Why: To learn more about Honeywell's products and programs.
When: Every Tuesday and Thursday at different times to fit your schedule
How:
1. Log on http://www.livemeeting.com/cc/honeywell/join
2. Enter Weekly Meeting ID: (EX: ELEARN10)
3. Enter Meeting Key: HONEYWELL (Note: Meeting key is the same for all eLearning Webcasts)
4. Dial: 1-888-443-4703
5. Phone meeting ID: *1153526* |
|
|
**Honeywell Product Training Webcasts: Whole-Hose Air Cleaners
|
|
**Honeywell Product Training Webcasts: Whole-Hose Air Cleaners
Who: Contractors and Distributors
What: Join Honeywell Product Managers and technical specialist for elearning live - a series of online training Webcasts on our new products and programs.
Where: Online and on the Phone
Why: To learn more about Honeywell's products and programs.
When: Every Tuesday and Thursday at different times to fit your schedule
How:
1. Log on http://www.livemeeting.com/cc/honeywell/join
2. Enter Weekly Meeting ID: (EX: ELEARN10)
3. Enter Meeting Key: HONEYWELL (Note: Meeting key is the same for all eLearning Webcasts)
4. Dial: 1-888-443-4703
5. Phone meeting ID: *1153526*
|
|
|
Airflow Fundamentals
|
|
In this course, the technician will learn the principals of airflow as it applies to residential and light commercial HVAC systems. The technician will learn hot to interpret fan performance tables, where and how to take air pressure measurements in the field to verify the overall air side component pressure drop such as evaporators and air cleaners.
Course Length: 3 Hours |
|
|
AQ2000 Hydronic Control
|
|
**Honeywell Product Training Webcasts: AQ2000 Hydronic Controls.
Who: Contractors and Distributors
What: Join Honeywell Product Managers and technical specialist for elearning live - a series of online training Webcasts on our new products and programs.
Where: Online and on the Phone
Why: To learn more about Honeywell's products and programs.
When: Every Tuesday and Thursday at different times to fit your schedule
How:
1. Log on http://www.livemeeting.com/cc/honeywell/join
2. Enter Weekly Meeting ID: (EX: ELEARN10)
3. Enter Meeting Key: HONEYWELL (Note: Meeting key is the same for all eLearning Webcasts)
4. Dial: 1-888-443-4703
5. Phone meeting ID: *1153526*
|
|
|
Basic Residental Airflow (Not duct design)
|
|
Attendees of this class will learn about system airflow set up, system/equipmetn blower charts, system troubleshooting, flex duct do's & dont's and how to usa magnehelic for system troubleshooting & blower set up.
Course Length: 2 hours |
|
|
Day & Night Product (Residential)
|
|
This class will cover all aspects of the day & Noght product, including product overview, new product introduction, product features & benefits, Copeland 2-stage scroll operation, installation of product & set-up, and low voltage wiring (thermostats).
Course Length: 3 Hours |
|
|
Dehumidification Systems
|
|
**Honeywell Product Training Webcasts: Dehumidification Systems.
Who: Contractors and Distributors
What: Join Honeywell Product Managers and technical specialist for elearning live - a series of online training Webcasts on our new products and programs.
Where: Online and on the Phone
Why: To learn more about Honeywell's products and programs.
When: Every Tuesday and Thursday at different times to fit your schedule
How:
1. Log on http://www.livemeeting.com/cc/honeywell/join
2. Enter Weekly Meeting ID: (EX: ELEARN10)
3. Enter Meeting Key: HONEYWELL (Note: Meeting key is the same for all eLearning Webcasts)
4. Dial: 1-888-443-4703
5. Phone meeting ID: *1153526*
|
|
|
ECM Variable Speed Motor
|
|
In this course, the technician will be equipped with the theory and practical application of the GE ECM motors used in variable speed HVAC equipment. The technician will be able to identify the main components of an ECM motor and their function; to properly set up the eCM control circuits using manufacturers instructions and diagrams. How to quickly troubleshoot ECM motors in the feild will also be reviewed.
Course Length: 3 Hours. |
|
|
Emerson Motors & Universal HVAC Controls
|
|
Motors & Universal HVAC Controls Training
- Proper Selection of Condenser Motors
- Properly adding more CFM's to your Emerson Blower Motor
|
|
|
EnviraLink - Web Based Tracking Applications
|
|
|
|
|
EPA Certification
|
|
The EPA says that any person that can, in reasonable course of their job, possibly release a refrigerant into the atmosphere must be EPA certified. The fine can be into the thousands of dollars for the contractor and technician if that person caught. Is it worth it? This class consists of a hour and 20 minute video followed by the certification test (online). You will know immediately following the test if you have passed. Everything on the test is in the video, there is also a preparatory book available on request. |
|
|
Fujitsu Mini Splits (NATE)*
|
|
This certification seminar provides detailed training in all aspects of proper sizing and installation: plus in-depth troubleshooting and diagnostics of Fujitsu mini-split air conditioners and heat pump. Detaild course material is paired with hands on involvement and participation from all students. Fujitsu Authorized Service TRaining Attendees can also recieve factory service and installation referrals that can provide an on-going source of revenue for the contractor.
Course Length: 8 Hours
(NATE)*: Successful course completeion provides an excellent value to determine if you are ready to take the NATE certification test (or other industry certification test) or apply for recertification.
Nate ID card will be required at the time of class in order to be eligible for CEU credit.
|
|
|
Furnance Ignition & Combustion
|
|
Furnance Ignition & Combustion -
Are your furnance customer safe?
WHAT YOU'LL LEARN:
Learn how natural gas furnances work.
· Learn the fundamentals of gas burner operation to enable you to recognise whether or not a furnance is operation properly.
· Easily diagnose and repair improper combustion problems like sooting, delayed ignition, noisy burners, lifting flames, lazy flames, and roll out.
· Also learn what makes a furnance vent properly and how to diagnose venting problems.
PLUS…
· How hot surface, spark & glow coil ignitors work and how to fix them.
· How thermocouple, liquid filled and bimetal pilot safeties work and how to fix them.
· How flam rectification flame safeties work and how to gix them.
· How the new furnance controllers work and how to troubleshoot them.
· Understand the differences between Honeywell, Carrier, White Rogers adn Goodman furnance controllers. |
|
|
Heat Pump Electrical Lab
|
|
Heat Pump Electrical Lab
At Total Tech Training we continuously strive to improve the value of our classes to our customers. We provide electrical trainers that allow us to simulate the electrical challenges encountered in the field. In this class most of the students time is spent working with the electrical trainers so retention is much higher than in a typical seminar. What will your tech learn?
· Wire a heat pump from scratch with no wiring diagram
· Learn the fundamentals of circuitry
· Troubleshoot circuitry from the ground up
· Learn to troubleshoot Shorts
· Learn the fastest ways to troubleshoot a system |
|
|
Heat Pump Fundamentsals / R-410A Certification
|
|
This course will enable the technician to full grasp the basics of the vapor compression cycle as it applies to residental and light commercial heat pump systems up to 25 tons. We will highlight R-410A refrigerant, from simple chemistry, safety, to pressure / temperature relationship to determine system charge and perform basic refrigerant circuit troubleshooting. Those who attend will learn the functions of the compressor, condenser, evaporator and expansion devices, to include heat pump specific items such as check valves, reversing valves and defrost controls.
Course Length: 3 Hours |
|
|
Heating Season (H/P & Gas)
|
|
This course goes over equipment application, gas conversion (LP), as well as high altitude applications. Attendees will learn how to set-up equipment, i.e. gas pressure, temperature rise, as well as heat pump operation, trouble-shooting the defrost cycle, and system charging. The instructor also cov ers Mobile Home equipment applications abd operation.
Course Length: 3.5 Hours |
|
|
Honeywell - Contractors, Transformers and Heat Sequencers
|
|
**Honeywell Product Training Webcasts: Contractors, Transformers and Heat Sequencers.
Who: Contractors and Distributors
What: Join Honeywell Product Managers and technical specialist for elearning live - a series of online training Webcasts on our new products and programs.
Where: Online and on the Phone
Why: To learn more about Honeywell's products and programs.
When: Every Tuesday and Thursday at different times to fit your schedule
How:
1. Log on http://www.livemeeting.com/cc/honeywell/join
2. Enter Weekly Meeting ID: (EX: ELEARN10)
3. Enter Meeting Key: HONEYWELL (Note: Meeting key is the same for all eLearning Webcasts)
4. Dial: 1-888-443-4703
5. Phone meeting ID: *1153526* |
|
|
Honeywell - Marketing Support - Contractor PRO
|
|
**Honeywell Product Training Webcasts: Marketing Support - Contractor PRO.
Who: Contractors and Distributors
What: Join Honeywell Product Managers and technical specialist for elearning live - a series of online training Webcasts on our new products and programs.
Where: Online and on the Phone
Why: To learn more about Honeywell's products and programs.
When: Every Tuesday and Thursday at different times to fit your schedule
How:
1. Log on http://www.livemeeting.com/cc/honeywell/join
2. Enter Weekly Meeting ID: (EX: ELEARN10)
3. Enter Meeting Key: HONEYWELL (Note: Meeting key is the same for all eLearning Webcasts)
4. Dial: 1-888-443-4703
5. Phone meeting ID: *1153526* |
|
|
Honeywell - Marketing Support - Literature Web Site
|
|
Who: Contractors and Distributors
What: Join Honeywell Product Managers and technical specialist for elearning live - a series of online training Webcasts on our new products and programs.
Where: Online and on the Phone
Why: To learn more about Honeywell's products and programs.
When: Every Tuesday and Thursday at different times to fit your schedule
How:
1. Log on http://www.livemeeting.com/cc/honeywell/join
2. Enter Weekly Meeting ID: (EX: ELEARN10)
3. Enter Meeting Key: HONEYWELL (Note: Meeting key is the same for all eLearning Webcasts)
4. Dial: 1-888-443-4703
5. Phone meeting ID: *1153526* |
|
|
Honeywell - Telephone Access Module (TAM)
|
|
**Honeywell Product Training Webcasts: Telephone Access Module.
Who: Contractors and Distributors
What: Join Honeywell Product Managers and technical specialist for elearning live - a series of online training Webcasts on our new products and programs.
Where: Online and on the Phone
Why: To learn more about Honeywell's products and programs.
When: Every Tuesday and Thursday at different times to fit your schedule
How:
1. Log on http://www.livemeeting.com/cc/honeywell/join
2. Enter Weekly Meeting ID: (EX: ELEARN10)
3. Enter Meeting Key: HONEYWELL (Note: Meeting key is the same for all eLearning Webcasts)
4. Dial: 1-888-443-4703
5. Phone meeting ID: *1153526* |
|
|
Honeywell - Thermostatic Mixing Valves and Codes
|
|
**Honeywell Product Training Webcasts: Thermostatic Mixing Valves and Codes.
Who: Contractors and Distributors
What: Join Honeywell Product Managers and technical specialist for elearning live - a series of online training Webcasts on our new products and programs.
Where: Online and on the Phone
Why: To learn more about Honeywell's products and programs.
When: Every Tuesday and Thursday at different times to fit your schedule
How:
1. Log on http://www.livemeeting.com/cc/honeywell/join
2. Enter Weekly Meeting ID: (EX: ELEARN10)
3. Enter Meeting Key: HONEYWELL (Note: Meeting key is the same for all eLearning Webcasts)
4. Dial: 1-888-443-4703
5. Phone meeting ID: *1153526* |
|
|
Honeywell EnviraLink - Web-based Track Applications
|
|
Honeywell EnviraLink - Web-Based Tracking Application.
Who: Contractors and Distributors
What: Join Honeywell Product Managers and technical specialist for elearning live - a series of online training Webcasts on our new products and programs.
Where: Online and on the Phone
Why: To learn more about Honeywell's products and programs.
When: Every Tuesday and Thursday at different times to fit your schedule
How:
1. Log on http://www.livemeeting.com/cc/honeywell/join
2. Enter Weekly Meeting ID: (EX: ELEARN10)
3. Enter Meeting Key: HONEYWELL (Note: Meeting key is the same for all eLearning Webcasts)
4. Dial: 1-888-443-4703
5. Phone meeting ID: *1153526*
|
|
|
Honeywell Marketing Support - Equiguard ESA and AirAdvice
|
|
**Honeywell Product Training Webcasts: Marketing Support - Equiguard ESA and AirAdvice.
Who: Contractors and Distributors
What: Join Honeywell Product Managers and technical specialist for elearning live - a series of online training Webcasts on our new products and programs.
Where: Online and on the Phone
Why: To learn more about Honeywell's products and programs.
When: Every Tuesday and Thursday at different times to fit your schedule
How:
1. Log on http://www.livemeeting.com/cc/honeywell/join
2. Enter Weekly Meeting ID: (EX: ELEARN10)
3. Enter Meeting Key: HONEYWELL (Note: Meeting key is the same for all eLearning Webcasts)
4. Dial: 1-888-443-4703
5. Phone meeting ID: *1153526* |
|
|
Honeywell Product Training Webcasts: TrueZONE Panels
|
|
**Honeywell Product Training Webcasts: TrueZONE Panels
Who: Contractors and Distributors
What: Join Honeywell Product Managers and technical specialist for elearning live - a series of online training Webcasts on our new products and programs.
Where: Online and on the Phone
Why: To learn more about Honeywell's products and programs.
When: Every Tuesday and Thursday at different times to fit your schedule
How:
1. Log on http://www.livemeeting.com/cc/honeywell/join
2. Enter Weekly Meeting ID: (EX: ELEARN10)
3. Enter Meeting Key: HONEYWELL (Note: Meeting key is the same for all eLearning Webcasts)
4. Dial: 1-888-443-4703
5. Phone meeting ID: *1153526* |
|
|
Honeywell Product Training Webcasts: Univeral Integrated Furnace Control
|
|
**Honeywell Product Training Webcasts: Univeral Integrated Furnace Control
Who: Contractors and Distributors
What: Join Honeywell Product Managers and technical specialist for elearning live - a series of online training Webcasts on our new products and programs.
Where: Online and on the Phone
Why: To learn more about Honeywell's products and programs.
When: Every Tuesday and Thursday at different times to fit your schedule
How:
1. Log on http://www.livemeeting.com/cc/honeywell/join
2. Enter Weekly Meeting ID: (EX: ELEARN10)
3. Enter Meeting Key: HONEYWELL (Note: Meeting key is the same for all eLearning Webcasts)
4. Dial: 1-888-443-4703
5. Phone meeting ID: *1153526*
|
|
|
Honeywell Product Training Webcasts: VisionPRO IAQ
|
|
**Honeywell Product Training Webcasts: VisionPRO IAQ
Who: Contractors and Distributors
What: Join Honeywell Product Managers and technical specialist for elearning live - a series of online training Webcasts on our new products and programs.
Where: Online and on the Phone
Why: To learn more about Honeywell's products and programs.
When: Every Tuesday and Thursday at diffrent times to fit your schedule
How:
1. Log on http://www.livemeeting.com/cc/honeywell/join
2. Enter Weekly Meeting ID: (EX: ELEARN10)
3. Enter Meeting Key: HONEYWELL (Note: Meeting key is the same for all eLearning Webcasts)
4. Dial: 1-888-443-4703
5. Phone meeting ID: *1153526*
|
|
|
HVAC Systems Start & Test - Gas Furnances
|
|
Class details coming soon! |
|
|
HVAC Systems Start & Test- Gas Furnances
|
|
Attention HVAC installers! Upon completion of this course, you will learn step-by-step tasks involved to properly start and test (commission) residential and light commercial gas fired warm air equipment. The goal of this course is to empower you. the professional installer to perform proper start up procedures using instrumentation to verify and document new furnace start up: without the need of a service technician.
Course Length 3 Hours. |
|
|
Kickstart (hard Start Devices) (NATE)*
|
|
This educational session will educate the HVAC contractor in technical skills that can reduce compressor failures and/or reduce no-defect warranty compressor returns. the presentation will cover a number of areas, including three-wire hard starts, two wire-hard starts, torque, rotor motion, start performance testing of a compressor, start performance with and without hard-start device, light dimming during start-up, start winding burnout, timing devices and more.
Course Length: 1 Hour
NATE*:
Successful course completion provides an excellent value to determine if you are ready to take the NATE certification test (or other industry certification test) or apply for re certification.
NATE ID CARD will be required at time of class in order to be eligible for CEU credit. |
|
|
LG Electric Mini Splits
|
|
This Course will include LG Product overview, installation and six steps to successful sell the LG DFS systems. The attendee will also learn about service, maintenance and trouble-shooting the system. The participant will have an oppertunity to work hands-on with the system to learn trouble-shooting procedures and become familiar with system parts and locations.
course Length: 8 hours |
|
|
NATE Pre-Training
|
|
A Nate, (North American Technicians Excellence), certification tells everybody that you are the best at what you do. Like automotive mechanics are ASE certified, the best of the HVAC industry is Nate certified. Nate technicians get the pay, respect and recognition they deserve. Employers can make their organization more marketable by showing their technicians are certified and experienced at what they do.
This "class" helps to answer the questions you might have before taking the test. |
|
|
Nate Pre-Training & Test
|
|
A Nate, (North American Technicians Excellence), certification tells everybody that you are the best at what you do. Like automotive mechanics are ASE certified, the best of the HVAC industry is Nate certified. Nate technicians get the pay, respect and recognition they deserve. Employers can make their organization more marketable by showing their technicians are certified and experienced at what they do. |
|
|
NATE Test
|
|
A Nate, (North American Technicians Excellence), certification tells everybody that you are the best at what you do. Like automotive mechanics are ASE certified, the best of the HVAC industry is Nate certified. Nate technicians get the pay, respect and recognition they deserve. Employers can make their organization more marketable by showing their technicians are certified and experienced at what they do.
This is the day of the certification test. Cost includes the test and materials. |
|
|
New Combustion Products
|
|
**Honeywell Product Training Webcasts: New Combustion Products
Who: Contractors and Distributors
What: Join Honeywell Product Managers and technical specialist for elearning live - a series of online training Webcasts on our new products and programs.
Where: Online and on the Phone
Why: To learn more about Honeywell's products and programs.
When: Every Tuesday and Thursday at different times to fit your schedule
How:
1. Log on http://www.livemeeting.com/cc/honeywell/join
2. Enter Weekly Meeting ID: (EX: ELEARN10)
3. Enter Meeting Key: HONEYWELL (Note: Meeting key is the same for all eLearning Webcasts)
4. Dial: 1-888-443-4703
5. Phone meeting ID: *1153526* |
|
|
New Wireless Comfort Systems
|
|
**Honeywell Product Training Webcasts: Wireless Comfort Systems
Who: Contractors and Distributors
What: Join Honeywell Product Managers and technical specialist for elearning live - a series of online training Webcasts on our new products and programs.
Where: Online and on the Phone
Why: To learn more about Honeywell's products and programs.
When: Every Tuesday and Thursday at different times to fit your schedule
How:
1. Log on http://www.livemeeting.com/cc/honeywell/join
2. Enter Weekly Meeting ID: (EX: ELEARN10)
3. Enter Meeting Key: HONEYWELL (Note: Meeting key is the same for all eLearning Webcasts)
4. Dial: 1-888-443-4703
5. Phone meeting ID: *1153526* |
|
|
Parker TXV / Filter Driers (NATE)*
|
|
This class reviews the basic refrigeration principals, as well as system dynamics and theory of operation. Attendees will learn the application, installation, and how to trouble shoot thermostatic expansion valves.
Course Length: 3 Hours
(NATE)*: Successful course completeion provides an excellent value to determine if you are ready to take the NATE certification test (or other industry certification test) or apply for recertification.
Nate ID card will be required at the time of class in order to be eligible for CEU credit.
|
|
|
Proper Refrigerant Charging
|
|
This charging class is structured to review and evaluate all the charging techniques that your service technicians are currently using. Your technicians will be surprised to learn that some of their most utilized charging techniques are actually some of the least effective. In addition, your technicians will learn new techniques that are at the heart of optimal charging as well as performance, efficiency, and reliability issues brought on by an improper charge. By applying the procedures outlined in this class, your crew can save money by preventing costly callbacks. |
|
|
R-410A Certification (NATE)*
|
|
This certification course discusses HFC Phase out (R-22) and the properties of R-410A. Participants will learn about charging, proper tools, oils (POE), safety rules and regulations, as well as recieve a temperature/pressure chart.
Course Length: 1.5 Hours
(NATE)*: Successful course completeion provides an excellent value to determine if you are ready to take the NATE certification test (or other industry certification test) or apply for recertification.
Nate ID card will be required at the time of class in order to be eligible for CEU credit. |
|
|
Refrigerant System Troubleshooting
|
|
Have you ever worked on a heat pump or air conditioner that was not performing properly, but could not determine the cause? How many times have you condemned an expansion valve or check valve and had an uneasy feeling inside? This class will give you the basics of refrigeration theory to refresh your memory and to underscore your knowledge of the workings of the refrigerant cycle. What you already know about refrigerant systems will be augmented to form a complete picture and enable you to easily solve refrigerant system problems that others consider difficult. |
|
|
Residential Ductwork Design
|
|
Did you know that over 50% of air conditioners tested in a recent study were found to have airflow rates at less than factory recommended minimums? Low airflow causes poor performance as well as reliability and serviceability problems. A thorough knowledge of air flow dynamics and ductwork design can enable a technician to easily uncover and resolve what many would consider to be difficult problems. Learn to design residential ductwork as well as the do's and don'ts of ductwork installation. |
|
|
Residential Ductwork Design (SA-700T) 2 Nights
|
|
Residential Ductwork Design (SA-700T) 2 nights
Did you know that over 50% of air conditioners tested in a recent study were found to have airflow rates at less than factory recommended minimums?Low airflow causes poor performance as well as reliability and serviceability problems. A thorough knowledge of air flow dynamics and ductwork design can enable a technician to easily uncover and resolve what many would consider to be difficult problems. Learn to design residential ductwork as well as the do’s and don’ts of ductwork installation. |
|
|
Residential DuctworkDesign
|
|
Residential Ductwork Design
Did you know that over 50% of air conditioners tested in a recent study were found to have airflow rates at less than factory recommended minimums? Low airflow causes poor performance as well as reliability and serviceability problems. A thorough knowledge of air flow dynamics and ductwork design can enable a technician to easily uncover and resolve what many would consider to be difficult problems. Learn to design residential ductwork as well as the do’s and don’ts of ductwork installation.
· HOW TO PROPERLY DESIGN A RESIDENTIAL DUCT SYSTEM.
· HOW DOES THE AIR “KNOW” WHERE TO GO IN A DUCT SYSTEM
· HOW TO AVOID DUCTWORK NO-NO'S
· EASY WAYS TO MEASURE TOTAL AIR FLOW
· HOW TO SIZE SUPPLY AND RETURN REGISTERS
· HOW TO SIZE BRANCH RUNS PROPERLY
· HOW TO ESTIMATE AIRFLOW DISTRIBUTION REQUIREMENTS THROUGHOUT A HOUSE |
|
|
Residential Furnance Installation
|
|
Class details coming soon! |
|
|
Residential Gas Furnance Service
|
|
Residential Gas Furnance Services - HVAC technicians attending this class will learn residential gas furnance sequence of operation for troubleshooting purposes. Using manufactoring instructions, OEM fault codes and wiring diagrams, the technician will learn how to test and document furnance operation with instrumentation to quickly identify gas furnance malfunctions. |
|
|
The Truth About Humidification
|
|
**Honeywell Product Training Webcasts: The Truth About Humidification
- A New Homeowner Feedback Survey
Who: Contractors and Distributors
What: Join Honeywell Product Managers and technical specialist for elearning live - a series of online training Webcasts on our new products and programs.
Where: Online and on the Phone
Why: To learn more about Honeywell's products and programs.
When: Every Tuesday and Thursday at diffrent times to fit your schedule
How:
1. Log on http://www.livemeeting.com/cc/honeywell/join
2. Enter Weekly Meeting ID: (EX: ELEARN10)
3. Enter Meeting Key: HONEYWELL (Note: Meeting key is the same for all eLearning Webcasts)
4. Dial: 1-888-443-4703
5. Phone meeting ID: *1153526* |
|
|
Troubleshoot & Test Defrost Controls
|
|
Take the mystery out of defrost controls. This class covers the operation, testing, set up, and diagnosis of the most commonly used controls from the early Electron-mechanical controls through the latest solid state boards. If you have ever had any doubts about whether a defrost system was working properly, this is the class for you. |
|
|
Troubleshooting Control Systems for Heat Pumps and A/C's
|
|
Learn the skills necessary to enable you to diagnose any LOW voltage electrical problem. This class takes you from the atomic level all the way to real world problem solving. It will address basic and advanced malfunctions actually found in the field caused by electrical wiring and control component malfunctions. No more having to guess what's wrong. This class makes a great companion class for SE-430, Troubleshooting High Voltage Systems. |
|
|
Troubleshooting Gas Combustion Problems
|
|
Learn how natural gas furnaces work. Learn gas burner operation to enable you to recognize whether or not a furnace is operating properly. Easily diagnose and repair improper combustion problems like sooting, delayed ignition, noisy burners, and roll out. Also learn what makes a furnace vent and how to diagnose venting problems. |
|
|
Troubleshooting Gas Ignition Controls
|
|
Learn how pilot safeties and ignition systems work starting with natural draft furnaces up through the new 80% furnaces with furnace controllers. Learn how to diagnose and repair thermocouples, liquid filled, bimetal, and flame rectification pilot safeties as well as glow coil, spark, and hot surface ignition systems. This class makes repairing furnaces a snap. |
|
|
Troubleshooting H/P Defrost Controls
|
|
Troubleshooting H/P Defrost Controls - Take the mystery out of the defrost controls. This class covers the operation, testing, set up, and diagnosis of the most commonly used controls from the early Electro-Mechanical controls through the latest solid state boards. If you have ever had any doubts about weather a defrost system was working properly, this class if for you. |
|
|
Troubleshooting the Entire Comfort System
|
|
Have you ever been on a job that you could not figure out what the problem was? How about when you get a simple complaint like "my a/c does not cool enough" and cannot find fault with the refrigerant system. What could be the problem? Is it the ductwork, the insulation, the way the house is or is not vented? Maybe it's a combination of all three. Learn to solve the problems no one else can figure out. |
|
|
TrueDRY Dehumidification Systems
|
|
**Honeywell Product Training Webcasts: TrueDRY Dehumidification Systems
Who: Contractors and Distributors
What: Join Honeywell Product Managers and technical specialist for elearning live - a series of online training Webcasts on our new products and programs.
Where: Online and on the Phone
Why: To learn more about Honeywell's products and programs.
When: Every Tuesday and Thursday at diffrent times to fit your schedule
How:
1. Log on http://www.livemeeting.com/cc/honeywell/join
2. Enter Weekly Meeting ID: (EX: ELEARN10)
3. Enter Meeting Key: HONEYWELL (Note: Meeting key is the same for all eLearning Webcasts)
4. Dial: 1-888-443-4703
5. Phone meeting ID: *1153526* |
|
|
TrueSTEAM and Humidification Systems & Control Solutions
|
|
**Honeywell Product Training Webcasts: TrueSTEAM Humidification Systems and Control Solutions
Who: Contractors and Distributors
What: Join Honeywell Product Managers and technical specialist for elearning live - a series of online training Webcasts on our new products and programs.
Where: Online and on the Phone
Why: To learn more about Honeywell's products and programs.
When: Every Tuesday and Thursday at different times to fit your schedule
How:
1. Log on http://www.livemeeting.com/cc/honeywell/join
2. Enter Weekly Meeting ID: (EX: ELEARN10)
3. Enter Meeting Key: HONEYWELL (Note: Meeting key is the same for all eLearning Webcasts)
4. Dial: 1-888-443-4703
5. Phone meeting ID: *1153526* |
|
|
Understanding Wiring Diagrams
|
|
So many service technicians work harder than necessary to diagnose electrical problems because they do not have a complete understanding of how wiring diagrams reveal a system's inner workings. This class will make the participant more productive while enabling him to relax and be more comfortable with his diagnosis. By the end of this class, you will be able to draw a complete heat pump wiring diagram from scratch. All advanced technicians read wiring diagrams fluently. You can too. |
|
|
Universal Intergrated Fan Control (UIFC)
|
|
Who: Contractors and Distributors
What: Join Honeywell Product Managers and technical specialist for elearning live - a series of online training Webcasts on our new products and programs.
Where: Online and on the Phone
Why: To learn more about Honeywell's products and programs.
When: Every Tuesday and Thursday at different times to fit your schedule
How:
1. Log on http://www.livemeeting.com/cc/honeywell/join
2. Enter Weekly Meeting ID: (EX: ELEARN10)
3. Enter Meeting Key: HONEYWELL (Note: Meeting key is the same for all eLearning Webcasts)
4. Dial: 1-888-443-4703
5. Phone meeting ID: *1153526*
|
|
